Stone Pointing & Repointing Services in Jordan | Cost per m²

مشاركة على ....

Stone pointing and repointing in Jordan is an essential service for buildings with deteriorated mortar joints, damaged stone facades, and gaps between natural or manufactured stone units. AL Emtyaz Facilities Management provides professional stone joint pointing, facade repointing, and masonry joint restoration services in Amman and across Jordan.

Whether you own an older stone building or are finishing a newly constructed property, properly installed mortar joints help maintain the appearance of stonework and reduce water penetration through deteriorated joints.

As part of our comprehensive Building and Exterior Works, AL Emtyaz offers stone pointing services for residential buildings, villas, commercial properties, exterior facades, and suitable interior stone surfaces.

One of the most common questions about this service concerns the stone repointing cost per square meter in Jordan. The price depends on the stone dimensions, number of mortar joints, facade area, building height, existing joint condition, and whether cleaning, materials, or additional protective treatments are included.

Some projects require only localized stone joint repairs to improve the appearance of the facade. Others need complete stone repointing, including removal of deteriorated mortar, joint preparation, installation of new mortar, and final cleaning.

Our services also include suitable pointing and joint repairs for manufactured stone. Where required, pointing work can be combined with stone facade cleaning, including carefully selected abrasive cleaning methods for surfaces that can tolerate them.

Need stone pointing contractors in Amman or Jordan? Contact AL Emtyaz at 0798495491 to arrange a free site inspection, discuss the condition of your stone facade, and request a quotation based on the actual work required.

You can also contact our team directly through WhatsApp:

Professional Stone Pointing Services in Amman and Jordan

Stone pointing is the process of placing and finishing mortar in the joints between stone units. It is used during new stonework installation and when restoring suitable masonry joints.

Stone repointing refers more specifically to removing damaged or deteriorated mortar from existing joints and replacing it with compatible new mortar.

Both services contribute to the appearance and maintenance of natural stone facades, limestone walls, and other masonry surfaces.

Over time, stone joints may become cracked, loose, discolored, or partially empty because of weather exposure, moisture, movement, and aging materials.

When joints deteriorate, rainwater and moisture may enter through openings, potentially causing additional damage to the wall or its backing materials.

AL Emtyaz provides stone facade pointing and repointing in Jordan for properties requiring new mortar joints, localized repairs, or more extensive facade restoration.

Our work may cover:

  • New stone pointing: Filling and finishing joints in newly installed stonework.
  • Stone repointing: Replacing deteriorated mortar in existing stone facades.
  • Natural stone joint repairs: Restoring suitable joints between natural stone units.
  • Manufactured stone pointing: Using compatible mortar systems for suitable artificial stone applications.
  • Exterior facade restoration: Repairing damaged joints and improving the visual consistency of stone facades.
  • Localized mortar repairs: Treating selected defective areas without necessarily repointing the entire facade.
  • Complete facade repointing: Renewing deteriorated stone joints across a larger area.
  • Stone cleaning and repointing: Combining suitable facade cleaning with subsequent mortar joint restoration.

The appropriate service is determined by the condition of the stone, the existing mortar, the exposure environment, and the purpose of the repair.

What Materials Are Used for Stone Pointing?

AL Emtyaz uses suitable mortar products for stone joint filling and repointing according to the requirements of each project.

Our material options include colored, polymer-modified cementitious pointing mortars designed for compatible natural or manufactured stone joints.

These products can provide a consistent decorative finish and suitable joint performance when selected and applied according to the manufacturer’s specifications.

However, mortar compatibility is essential. Some older buildings and softer limestone masonry may require lime-based or other specially selected mortars rather than a harder cement-rich product.

The mortar should be chosen according to the stone characteristics, existing masonry, exposure conditions, and required joint performance.

Features of Our Stone Pointing Mortar Options

Depending on the selected material, available features may include:

  • Ready-mixed colored mortar: Predosed products designed to provide a consistent finish when prepared correctly.
  • Polymer-modified formulations: Suitable products designed to improve selected application and bonding properties.
  • Stone joint applications: Mortars developed for compatible masonry and stone pointing work.
  • Natural and manufactured stone compatibility: Material selection according to the particular stone type and installation system.
  • Weather exposure performance: Products selected according to the exterior environment and manufacturer specifications.
  • Color consistency: Mortar colors that can complement the appearance of the stone facade.
  • Appropriate joint finishing: Mortar that can be shaped to achieve the selected joint profile.

A suitable pointing mortar can help reduce moisture penetration through deteriorated joints, but it should not be considered a complete waterproofing solution for every building.

Our Stone Pointing and Repointing Process

Professional stone repointing in Jordan requires careful preparation, suitable mortar selection, accurate joint filling, and appropriate finishing.

At AL Emtyaz, we organize the work into five principal stages, with adjustments according to the facade condition and project requirements.

Step 1: Cleaning the Stone and Mortar Joints

Proper joint preparation is important because dust, loose mortar, and surface contamination can interfere with the bonding and performance of new pointing materials.

Before applying new mortar, our team examines the joints and carries out suitable cleaning and preparation work.

Work Included in the Initial Preparation

  • Removing loose dust and debris from the mortar joints.
  • Checking the condition of existing mortar and adjacent stone edges.
  • Removing unsuitable surface deposits where necessary.
  • Preparing the joints according to the selected mortar system.
  • Checking moisture conditions and following the mortar manufacturer’s preparation instructions.
  • Protecting adjacent stone surfaces from unnecessary damage or staining.

The cleaning method depends on the stone type and its condition. Aggressive mechanical cleaning is not appropriate for every limestone or historic facade.

Step 2: Removing Old and Deteriorated Mortar

When existing mortar is loose, cracked, or significantly deteriorated, it may be necessary to remove the defective material before repointing.

The objective is to prepare a suitable joint without unnecessarily damaging the surrounding stone or sound masonry.

How We Prepare Deteriorated Stone Joints

  • Identifying joints where existing mortar has become loose or damaged.
  • Removing defective mortar with suitable tools and controlled methods.
  • Taking precautions to avoid chipping or scratching adjacent stone edges.
  • Removing dislodged mortar and debris from the prepared joints.
  • Checking that the joint preparation is suitable for the new pointing material.
  • Collecting and removing waste materials from the work area.

Joint preparation depth and technique should be determined according to the existing masonry and repair requirements. Excessive removal of sound mortar or damage to the stone should be avoided.

Step 3: Preparing the Stone Pointing Mortar

After the joints have been prepared, the appropriate pointing mortar is selected and mixed according to its technical requirements.

AL Emtyaz offers suitable ready-mixed and modified mortar options for stone pointing applications.

Color selection is also important because the mortar joints contribute significantly to the overall appearance of the finished facade.

Mortar Selection and Preparation Considerations

  • Choosing a material compatible with the existing stone and masonry.
  • Selecting a suitable mortar color and joint appearance.
  • Following the manufacturer’s mixing and water proportion instructions.
  • Preparing a consistent mixture suitable for the intended application.
  • Considering temperature, moisture, and weather conditions during application.
  • Using compatible materials for existing or newly constructed stonework.

For older masonry, particularly softer natural limestone, the new mortar must not be selected solely for maximum hardness. Compatibility with the surrounding masonry is essential.

Step 4: Filling and Finishing the Stone Joints

This is the main stage of the stone pointing process.

Our team places suitable mortar into the prepared joints and finishes the surface according to the required joint profile and facade appearance.

Careful application helps produce consistent mortar lines and avoids unnecessary contamination of the stone faces.

Important Details During Mortar Application

  • Filling prepared joints properly without leaving avoidable voids.
  • Using appropriate tools for the joint width and required profile.
  • Maintaining consistent joint depth and finishing across the facade.
  • Following the specified application and compaction procedures.
  • Avoiding excessive mortar spreading across visible stone surfaces.
  • Protecting newly applied mortar during the required setting and curing period.

Different joint profiles may be appropriate for different stone types, architectural styles, and restoration requirements.

The joint finish should be selected with consideration for the existing stonework and the intended visual result.

Step 5: Final Facade Cleaning and Inspection

After the pointing work has been completed, the facade is reviewed and suitable final cleaning is carried out.

The cleaning process should respect the curing requirements of the mortar and the characteristics of the stone surface.

Final Finishing Activities

  • Removing suitable excess mortar from the stone surface.
  • Cleaning the affected facade using methods compatible with the stone.
  • Checking the appearance and consistency of the completed joints.
  • Reviewing visible corners, edges, and areas requiring detailed finishing.
  • Checking for incomplete or visibly defective joint sections.
  • Cleaning the work area and removing remaining installation debris.

At AL Emtyaz, these stages form the basis of our stone joint pointing and facade repointing services, from initial preparation to final finishing.

Stone Repointing Cost per Square Meter in Jordan

The stone pointing price per square meter in Jordan depends on several factors. Not every facade has the same joint dimensions, mortar condition, accessibility, or preparation requirements.

For this reason, AL Emtyaz provides project-specific quotations rather than applying one fixed rate to every stone facade.

We offer a free site inspection to review the stonework, discuss the service required, and prepare a quotation based on the project conditions.

When calculating the cost, we consider the following factors:

1. Number of Facades and Total Wall Area

There is a difference between repointing one small stone wall and completing the joints on all four facades of a building.

The total work area affects the labor requirements, quantity of materials, site preparation, access equipment, and estimated project duration.

Stone pointing quotations may be calculated based on the measured facade area in square meters, with adjustments for the amount and complexity of joint work involved.

2. Stone Dimensions and Joint Quantity

Stone dimensions have an important effect on pointing costs because different stone sizes create different numbers and lengths of mortar joints within the same wall area.

For example, stone units with approximate heights or dimensions of 12cm, 25cm, or 50cm can produce different joint patterns and mortar requirements.

Smaller stone units may require more joint finishing work per square meter than larger units, depending on the installation pattern.

Joint width, depth, and existing condition also affect the required mortar quantity and labor time.

3. Stone Location and Building Height

The position of the stonework affects accessibility and the equipment required.

Pointing joints on a ground-level garden wall may involve different work arrangements from repointing upper floors or high exterior facades.

Additional access equipment, scaffolding, safety precautions, or working platforms may be required depending on the building height and site conditions.

Interior decorative stonework and exterior stone facades may also have different installation and finishing requirements.

4. Stone Cleaning Before Repointing

Some projects require stone facade cleaning before new pointing work begins.

This may be necessary when dirt, old coatings, or deposits interfere with the assessment and preparation of the joints.

Where appropriate, the work may include controlled abrasive cleaning or another suitable stone cleaning method.

Stone cleaning is a separate service when it is not included in the original pointing quotation.

The selected cleaning method must be compatible with the stone. Abrasive blasting can damage soft limestone or historic stonework if unsuitable methods are used.

5. Materials Included or Labor Only

AL Emtyaz offers different arrangements for stone pointing and repointing projects.

Customers may request:

  • Materials and labor: AL Emtyaz supplies the suitable pointing mortar and carries out the agreed installation work.
  • Labor-only pointing: Our team carries out the pointing or repointing work using suitable materials supplied by the property owner.

For labor-only projects, the customer-supplied mortar must be suitable for the stone and intended application.

The quotation should clarify which materials, tools, preparation activities, and additional services are included.

6. Waterproofing or Protective Treatment After Pointing

Some exterior stone facades may require additional protective treatment after pointing work has been completed.

Depending on the stone and building conditions, a suitable water-repellent treatment or other compatible protection system may be considered.

Protective treatments are not automatically necessary for every facade and should be selected according to the material and moisture conditions.

Any additional waterproofing or protective treatment is priced separately when it is not included in the original scope.

7. Project Location in Amman or Other Governorates

The project location can affect transportation, scheduling, equipment arrangements, and other operational costs.

AL Emtyaz provides stone pointing inquiries and service arrangements for Amman and other governorates in Jordan.

Travel and site requirements are considered when preparing a quotation for projects outside the capital.

Get a Free Stone Pointing Inspection and Quotation

Instead of estimating the project cost without reviewing the facade, we offer a free site inspection to assess the stone joints and determine the required work.

Following the inspection, our team can provide a quotation covering the relevant service items, including mortar, labor, joint preparation, facade cleaning, and other agreed requirements.

Call 0798495491 to request the stone repointing price per m² for your property in Jordan.

Stone Repointing After Sandblasting and Facade Cleaning

Stone facade cleaning and repointing are complementary services that may be combined in a building restoration project.

After accumulated dirt, deposits, or unsuitable surface materials are removed, the condition of the mortar joints may become easier to assess.

Some facades show loose or damaged pointing that requires restoration after the cleaning stage.

AL Emtyaz can arrange suitable cleaning and subsequent repointing as part of a coordinated stone facade maintenance project.

1. Sandblasting and Abrasive Stone Cleaning

Sandblasting is a form of abrasive cleaning in which an abrasive material is directed at a surface to remove selected deposits or coatings.

For stone facades, the cleaning method and abrasive action must be carefully evaluated because certain stones can be damaged by aggressive blasting.

Where appropriate for the stone type and condition, controlled abrasive cleaning may be considered as part of a facade restoration project.

Potential Benefits of Suitable Facade Cleaning

  • Removing selected accumulated dirt and surface deposits.
  • Improving visibility of damaged mortar joints.
  • Preparing suitable stone surfaces for further restoration work.
  • Helping identify areas that require localized repointing.
  • Improving the appearance of the facade when the selected cleaning method is suitable.

Important: Abrasive blasting is not appropriate for every natural or manufactured stone. Some limestone surfaces require gentler cleaning methods to avoid erosion, loss of surface detail, or permanent damage.

2. Repointing Stone Joints After Cleaning

After suitable facade cleaning and joint preparation, damaged or missing mortar may be replaced using a compatible pointing material.

The repointing work is performed according to the condition of the stone and the required finish.

Benefits of Combining Cleaning with Repointing

  • Repairing joints that become visibly damaged after cleaning.
  • Replacing loose or deteriorated mortar.
  • Creating more consistent joint color and finishing.
  • Improving the overall appearance of the restored facade.
  • Reducing water entry through suitable repaired mortar joints.
  • Coordinating cleaning and restoration activities within one project.

Why Combine Stone Cleaning and Repointing?

Some facade defects are difficult to evaluate when the stonework is covered with heavy deposits or old surface contamination.

After cleaning, the following problems may become more visible:

  • Loose, missing, or crumbling mortar joints.
  • Fine cracks in old pointing.
  • Uneven mortar joint colors.
  • Previously concealed gaps between stone units.
  • Selected areas requiring more extensive restoration.

For this reason, some customers choose a coordinated stone cleaning and repointing service in Jordan rather than requesting cleaning alone.

The final service plan should reflect the stone condition and whether repointing, cleaning, or both are actually required.

Cosmetic Stone Pointing vs. Complete Stone Repointing

Not every stone facade requires the same degree of joint restoration.

Some buildings need limited cosmetic stone pointing to improve the appearance of suitable joints, while others require complete repointing because the existing mortar has deteriorated.

AL Emtyaz provides both types of service and examines the existing stonework before recommending the appropriate work.

1. Cosmetic Stone Joint Pointing

Cosmetic pointing generally refers to limited joint finishing or localized repairs intended primarily to improve the appearance of existing stonework.

It may be appropriate when the existing mortar remains sound and the defects are limited to selected superficial areas.

When Is Cosmetic Pointing Appropriate?

  • When there are limited superficial gaps or defects.
  • When the existing mortar remains stable and firmly attached.
  • When the primary goal is improving the visual consistency of suitable joints.
  • When only small areas of the facade require decorative finishing.

Advantages of Localized Cosmetic Pointing

  • May involve a lower cost than complete facade repointing.
  • Usually requires a smaller work area.
  • Can be completed more quickly when preparation requirements are limited.
  • May improve the appearance of selected mortar joints.

Limitations of Cosmetic Pointing

  • Does not necessarily resolve water penetration problems.
  • Is not suitable for deeply deteriorated mortar joints.
  • Does not replace structural repair when the wall or stone support system is damaged.
  • May be inappropriate if new mortar is applied over loose or defective old material.

A cosmetic treatment should only be selected where the existing joint condition supports that approach.

2. Complete Stone Facade Repointing

Complete stone repointing involves removing unsuitable existing mortar from the affected joints and replacing it with new compatible mortar.

This approach is appropriate for facades with widespread joint deterioration or significant areas of missing, loose, or cracked mortar.

Depending on the project, complete repointing may be combined with stone cleaning or additional moisture protection work.

When Is Complete Repointing Required?

  • When substantial areas of mortar are missing or crumbling.
  • When open joints contribute to water penetration.
  • When old pointing has lost adhesion or deteriorated significantly.
  • When deep joint defects require removal and replacement of mortar.
  • During suitable restoration projects involving older stone buildings.
  • When multiple facade areas require consistent mortar renewal.

Complete Stone Repointing Work Stages

  • Inspecting the existing stone and mortar joints.
  • Removing deteriorated mortar using suitable methods.
  • Cleaning and preparing the affected joints.
  • Selecting and preparing compatible new mortar.
  • Filling and finishing the joints.
  • Completing suitable final facade cleaning.
  • Applying additional protective treatment where required and included in the project.

How Do We Determine Which Pointing Service Is Needed?

AL Emtyaz provides a site inspection to assess the condition of the facade before defining the required pointing work.

The assessment considers:

  • The condition of the existing mortar joints.
  • The type and condition of natural or manufactured stone.
  • The extent of cracking, gaps, or missing mortar.
  • Whether water penetration or moisture problems are present.
  • The required visual appearance of the completed facade.
  • Whether the service is intended for decorative improvement, joint restoration, or additional protection.

Based on these findings, our team can recommend a suitable service scope and provide a quotation reflecting the actual requirements.

Stone Pointing for Natural Limestone and Manufactured Stone

Stone pointing requirements differ depending on the material used in the building.

Natural limestone, other natural stone types, and manufactured stone products may require different mortar formulations and installation methods.

Natural Limestone Pointing and Repointing

Limestone pointing in Jordan requires particular attention to the properties of the stone and the existing mortar.

Some limestone facades can be sensitive to unsuitable cleaning methods or hard mortar formulations.

When repointing existing limestone masonry, the material should be selected to suit the stone, the original construction, and the environmental conditions.

Older and historic limestone buildings may require different repair materials from modern stone facades.

Manufactured Stone Joint Pointing

Manufactured stone is used in some residential and commercial decorative wall systems.

Depending on the product, joints between manufactured stone units may require suitable mortar or another compatible finishing system.

AL Emtyaz provides pointing inquiries for manufactured stone applications, with material selection based on the product specifications and wall construction.

Stone Pointing for New and Existing Buildings

Newly constructed buildings may need stone joint pointing as part of the exterior finishing works.

Existing properties may require repointing to replace deteriorated joints and restore a consistent facade appearance.

Our services can be arranged according to the condition and construction stage of each property.

Why Choose AL Emtyaz for Stone Repointing in Jordan?

Choosing suitable stone pointing contractors in Jordan is important because the quality of the work depends on correct preparation, appropriate mortar, careful application, and the condition of the existing masonry.

AL Emtyaz provides stone facade pointing and restoration services with attention to the technical and practical requirements of each project.

1. Organized Inspection and Technical Supervision

Our work begins with reviewing the condition of the facade and identifying the joints that require attention.

Technical supervision helps coordinate the work stages, material selection, and installation requirements throughout the project.

Our Approach Includes

  • Reviewing the stone facade before work begins.
  • Identifying areas with deteriorated or missing mortar.
  • Selecting mortar appropriate for the stone and application.
  • Planning the required joint preparation and finishing work.
  • Reviewing the work during installation.
  • Checking completed joint finishes and the agreed work scope.

2. Quality Stone Pointing Materials

The pointing mortar plays an important role in the appearance and performance of restored joints.

We use suitable materials according to the stone characteristics and project requirements, including compatible colored and polymer-modified cementitious mortars where appropriate.

Material Considerations

  • Appropriate compatibility with the stone and existing masonry.
  • Suitable performance for the intended exterior or interior environment.
  • Selected mortar colors that complement the facade.
  • Application characteristics appropriate for the required joint width and depth.
  • Manufacturer instructions covering mixing, application, and curing.
  • Suitable durability and moisture behavior for the masonry construction.

Material selection is based on the actual application. A mortar that works well on modern stone cladding may not be appropriate for older or softer masonry.

3. Planned Work Schedules

Stone pointing projects often form part of larger construction or facade restoration work.

For this reason, we discuss the expected work schedule and coordinate the required activities according to the project scope.

Project Scheduling Considerations

  • Reviewing the required work area before scheduling.
  • Establishing suitable start and completion arrangements.
  • Organizing labor and materials according to the project size.
  • Coordinating access equipment and facade preparation.
  • Considering weather and mortar curing requirements.
  • Communicating relevant scheduling changes when necessary.

4. Project-Specific Stone Pointing Prices

We do not apply one standard price to every stone pointing project because each facade has different conditions and requirements.

AL Emtyaz offers quotations based on the measured work area, joint condition, mortar materials, cleaning requirements, and other relevant factors.

Our Pricing Approach Includes

  • A free site inspection for the stone pointing service.
  • Reviewing the existing facade and mortar joints.
  • Identifying the required preparation and repair work.
  • Clarifying whether the quotation includes materials and labor.
  • Separating additional cleaning or protective treatment where applicable.
  • Explaining the principal items included in the service quotation.

This approach helps property owners understand the work being priced rather than relying on a generic cost estimate.

5. Consistent Facade Finishing

Well-executed pointing can make a visible difference to the appearance of stone facades.

Consistent mortar color, suitable joint profiles, careful finishing, and appropriate final cleaning help create a more uniform result.

Expected Results of Suitable Stone Pointing

  • More consistent mortar joints across the treated areas.
  • Improved appearance of previously damaged or incomplete joints.
  • Replacement of suitable loose or deteriorated mortar.
  • Improved resistance to water entry through properly repaired joints.
  • A cleaner and more coordinated stone facade appearance.

The final performance depends on the stone condition, correct material selection, installation quality, and any underlying building defects.

Stone Pointing and Repointing Services Across Jordan

AL Emtyaz Facilities Management provides stone pointing and repointing service arrangements for Amman and other governorates of Jordan.

We receive inquiries for residential buildings, villas, commercial properties, new stone facades, and older buildings requiring joint restoration.

Our service coverage includes northern, central, and southern Jordan, with scheduling and work arrangements determined according to the project location and requirements.

Stone Pointing in Northern Jordan

We handle stone pointing and facade repointing inquiries for the following northern governorates:

  • Irbid: Stone joint repairs and exterior facade repointing for suitable properties.
  • Mafraq: Stone pointing and facade restoration inquiries for residential and commercial buildings.
  • Jerash: Suitable stone mortar joint restoration and repointing work.
  • Ajloun: Stone facade maintenance and repointing services according to project requirements.

Stone Repointing in Central Jordan

Our central Jordan service inquiries include:

  • Amman: Stone pointing, repointing, and exterior stone facade restoration.
  • Zarqa: Stone joint repairs and suitable masonry restoration services.
  • Balqa and Salt: Stone pointing and facade joint restoration for suitable properties.
  • Madaba: Natural stone and manufactured stone pointing inquiries.

Stone Repointing in Southern Jordan

We also receive stone pointing and repointing inquiries from southern Jordan, including:

  • Karak: Stone facade pointing and restoration work.
  • Tafilah: Stone joint repair and repointing service inquiries.
  • Ma’an: Stone pointing and suitable building facade maintenance.
  • Aqaba: Stone facade pointing and repointing according to project requirements.

Stone Pointing Services Throughout Amman

AL Emtyaz provides stone pointing and repointing in Amman, covering residential and commercial areas across the capital.

Our Amman service coverage includes:

  • Abdoun
  • Deir Ghbar
  • Sweifieh
  • Marj Al Hamam
  • Tla’ Al Ali
  • Khalda
  • Rabieh
  • Gardens Street area
  • Tabarbour
  • Sports City area
  • North and South Hashemi
  • Jabal Al Hussein
  • Jabal Al Weibdeh
  • Marka
  • Al Nasr
  • Jabal Al Nuzha
  • Al Muqabalain
  • Al Quwaysimah
  • Dahiyat Al Yasmeen
  • Dahiyat Al Rasheed
  • Dahiyat Prince Hassan
  • Abu Nseir
  • Shafa Badran
  • Jubeiha
  • Sweileh
  • Bayader
  • Naour
  • Sahab
  • Other neighborhoods and districts throughout South Amman

For other neighborhoods in Amman, contact our team with your property location and the type of stone pointing work required.

Site Visits and Project Scheduling

When arranging stone pointing work, our team considers the project location, facade condition, required equipment, and expected duration.

Service arrangements include:

  • Scheduling site visits according to the property location.
  • Discussing suitable access and work arrangements.
  • Organizing labor, materials, and necessary equipment.
  • Respecting the agreed site access arrangements and property requirements.
  • Cleaning the work area after completing the agreed activities.

To confirm inspection and service availability for your location, call 0798495491.

Stone Pointing and Repointing Service Summary

The following table provides an overview of our stone pointing services in Jordan, including available options, materials, pricing factors, and service coverage.

Service DetailInformation
Service NameStone Pointing and Repointing in Jordan
Service TypesLocalized cosmetic pointing; complete stone repointing; new stone joint pointing
Stone ApplicationsNatural stone; manufactured stone; new building facades; existing stone buildings
Related ServicesStone facade cleaning; suitable abrasive cleaning; joint repairs; optional protective treatment
Pointing MaterialsCompatible pointing mortar, including suitable colored and polymer-modified cementitious products where appropriate
Principal Work StagesJoint inspection and cleaning; removal of deteriorated mortar; material preparation; joint filling and finishing; final facade cleaning
Common Repair ConditionsMissing mortar; crumbling joints; cracks; open gaps; water penetration through defective joints; uneven joint appearance
Cleaning Before RepointingSelected according to stone condition; abrasive cleaning only where suitable for the surface
Pricing BasisStone dimensions; joint quantity and condition; facade area; building height; access; materials; cleaning; project location
Stone Pointing Cost per m²Project-specific quotation after free site inspection; no fixed universal rate
Materials and LaborSupply and installation or suitable labor-only arrangements
Additional ProtectionCompatible protective treatment may be quoted separately when required
Service CoverageAmman and Jordan’s northern, central, and southern governorates
Typical Project DurationDepends on facade area, joint condition, preparation, access, and weather; some medium-sized facade projects may take several days
Site InspectionFree inspection for assessing the stonework and preparing a project quotation
Contact Number0798495491

Frequently Asked Questions About Stone Pointing in Jordan

What is stone pointing?

Stone pointing is the process of placing and finishing mortar in the joints between stone units. It is used in new stonework and for suitable joint finishing and repair applications.

What is the difference between stone pointing and repointing?

Pointing generally refers to finishing mortar joints, while repointing specifically involves removing deteriorated existing mortar and replacing it with new compatible mortar. Both services can improve the appearance and condition of stonework.

How much does stone pointing cost per square meter in Jordan?

The cost depends on the stone dimensions, number of joints, facade area, joint condition, access requirements, materials, and additional services. AL Emtyaz provides project-specific quotations following a free site inspection.

Does AL Emtyaz provide stone repointing in Amman?

Yes. AL Emtyaz provides stone pointing and repointing services in Amman, including facade joint repairs and complete mortar renewal where required.

Do you offer free stone pointing inspections?

Yes. AL Emtyaz offers a free site inspection for the stone pointing service to review the facade condition and prepare a quotation based on the required work.

Can deteriorated stone mortar joints be repaired?

Many deteriorated mortar joints can be repaired by removing defective material and installing compatible new mortar. The appropriate method depends on the stone and condition of the existing masonry.

What mortar is used for stone pointing?

Suitable pointing materials may include colored cementitious mortars, polymer-modified products, or lime-based mortars, depending on the stone and construction. Mortar compatibility is particularly important for older and softer masonry.

Can you repoint natural limestone facades?

Yes. AL Emtyaz handles natural stone and limestone repointing inquiries. The selected mortar and preparation method should be compatible with the limestone and existing wall construction.

Do you provide pointing for manufactured stone?

Yes. Suitable manufactured stone installations may require mortar joint pointing or repairs. The material and technique should follow the requirements of the manufactured stone system.

Can stone pointing prevent water leakage?

Properly restored mortar joints can help reduce water entry through defective joints. However, pointing alone may not solve water leakage caused by roof defects, wall cracks, drainage problems, or other building conditions.

Is sandblasting necessary before stone repointing?

No. Sandblasting is not necessary for every project and can damage certain stone surfaces, particularly soft limestone. Cleaning methods should be selected according to the stone type, condition, and restoration requirements.

Can stone cleaning and repointing be completed together?

Yes. Suitable facade cleaning can be coordinated with stone repointing when both services are required. The cleaning method should not damage the stone or interfere with the subsequent pointing work.

What is cosmetic stone pointing?

Cosmetic pointing generally involves limited repairs or finishing work intended to improve the appearance of suitable existing joints. It is not appropriate for deeply deteriorated mortar or unresolved water penetration problems.

When is complete stone repointing required?

Complete repointing may be required when mortar joints are extensively cracked, loose, missing, or deteriorated. The work involves removing defective mortar and replacing it with suitable new material.

Can you repair the joints on an old stone building?

AL Emtyaz provides stone joint restoration inquiries for older buildings. Historic or soft masonry may require specially selected mortar and careful preparation methods to avoid damaging the existing stonework.

Does the stone pointing quotation include materials?

AL Emtyaz offers materials-and-labor and suitable labor-only arrangements. The quotation should specify whether pointing mortar, joint preparation, cleaning, and other materials are included.

Can I supply the pointing mortar myself?

Yes. Labor-only arrangements may be available when the customer supplies suitable mortar. The material must be compatible with the stone and intended pointing application.

Do stone facades need waterproofing after repointing?

Not every facade requires additional waterproofing or protective treatment. The need depends on the stone characteristics, moisture conditions, and building design. Suitable protective treatments may be quoted separately where appropriate.

How long does stone facade repointing take?

Project duration depends on the facade area, joint condition, access requirements, cleaning work, and mortar curing conditions. Some medium-sized facade projects may take several days, while larger or more complicated projects require additional time.

Do you repoint stone facades outside Amman?

Yes. AL Emtyaz handles stone pointing and repointing service arrangements across Jordan, including Irbid, Zarqa, Salt, Madaba, Jerash, Ajloun, Mafraq, Karak, Tafilah, Ma’an, and Aqaba. Contact our team to confirm scheduling for your location.

How do I book stone pointing contractors in Jordan?

Call AL Emtyaz at 0798495491 or contact our team through WhatsApp. Provide your property location, facade dimensions, and a description of the joint condition to arrange a free inspection and quotation.

Contact AL Emtyaz for Stone Pointing and Repointing in Jordan

AL Emtyaz Facilities Management provides professional stone pointing and repointing services in Amman and Jordan, including natural stone joint repairs, manufactured stone pointing, complete facade repointing, and suitable stone cleaning services.

Our services cover newly constructed buildings, residential properties, villas, commercial facades, and older stone buildings requiring mortar joint restoration.

We use suitable pointing materials according to the stone and project requirements, including compatible colored and polymer-modified mortars where appropriate.

Whether your facade needs a limited cosmetic repair or extensive mortar replacement, our team can inspect the joints and determine the work required.

We offer free stone pointing site inspections and prepare quotations according to the facade area, stone dimensions, joint condition, materials, and any additional cleaning or protective work.

Call AL Emtyaz at 0798495491 to inquire about stone repointing prices per square meter, book a free site inspection, or request stone facade pointing services in Amman and across Jordan.

You can also contact us directly through WhatsApp using the button below:

مشاركة على ....
Scroll to Top